How to Change the Battery in a Jeepney Key Fob?
It can be challenging to determine if replacing the battery in your Jeep key fob will fix your issues. However, some common indicators indicate that your Jeep key fob battery needs to be changed.
- Jeep drivers may notice the first signs of a problem when they need to press their key fob buttons multiple times to unlock or lock their vehicle. This can disrupt their rhythm and be frustrating. If this is happening to you, it may be time to change the battery in your Jeep key fob.
- The range of your key fob battery is limited to 50 feet from the vehicle. As the battery starts to run out, you may observe a decrease in the range.
Tools Required to Change the Battery in a Jeep Key Fob
To start replacing the battery, make sure you have the necessary tools. You’ll need a small Flathead Screwdriver to remove the old battery and a new CR2032 battery as a replacement.
How to Change the Battery in a Jeep Key Fob?
- Locate the seam next to the keyring mount to open the Jeep key fob and insert a flathead screwdriver.
- Gently apply downward pressure on the screwdriver to detach the segments of the key fob. Avoid twisting while pressing down, as it could harm the plastic and ruin the key fob.
- To remove the old battery, please access it first.
- Insert the CR2032 battery you bought, placing the negative side facing downwards.
- Place the circuit board onto the keypad, and then insert the keypad into the fob.
- Connect the two halves of your key fob by snapping them together.
- After you close the compartment, replace the metal emergency key in your key fob.
To check whether the replacement process was successful, try using the “lock” or “unlock” key fob buttons to test the new batteries. If everything is working correctly, you should see signs such as the door locks opening and closing or the parking lights flashing.
If there are no signals, the new battery is not functional. In this situation, seek help from a professional locksmith service. You can get expert assistance by visiting our dealership.
What is the Lifespan of a Jeep Key Fob Battery?
What is the expected lifespan of your Jeep key fob battery? Typically, key fob batteries can last three to four years with regular use, although an exact duration cannot be guaranteed.
At Lock Angeles, we suggest switching between two key fobs periodically to extend their lifespan, as they are usually sold as a pair. This way, you can replace both batteries simultaneously.
Final Thoughts
Jeep key fob battery replacement is a simple process you can do yourself. The steps are straightforward, and the required tools are accessible. Additionally, you have the freedom to choose any CR2032 battery. However, if you encounter difficulties while replacing your Jeep key fob battery, contact Lock Angeles’ and seek assistance from our expert technicians. With this article, you are fully prepared to safely and hassle-free change the battery in your Jeep key fob!
In conclusion, replacing a Jeep key fob battery is straightforward. You need a few tools, including a flathead screwdriver and CR2032 battery, which are easy to find and affordable. This process is doable for any driver, but you can always seek assistance from Lock Angeles’ experts. Replacing a Jeep key fob battery is an easy and cost-effective way to keep your car’s locks working correctly.
